30w Li-Ion Battery Charger

PSYC1262000
Product name: 30W battery charger
Product model: PSYC1262000
Product size: 71*47*58.5mm
Product input: 100~240V, 50Hz/60Hz, 0.6A Max
Output voltage: 5-42V
Output current: 0.5-4.5A (30Wmax)
Optional power: 12.6V/2A, 14.6V/2A, 21V/1.2A, etc.
Safety standards: IEC62368, 61558, 60335
Safety certification: 3C/UL/FCC/PSE/CE/UKCA, etc.
Product pins: Chinese, American, Japanese, European, British, Australian, fixed, replaceable pins
Protection mechanism: short circuit, overcurrent, overvoltage, overload.

Product Information

Product model :

PSYC1262000

Product brand :

PSY

Manufacturer :

Shenzhen Pengshengye Electronics Co., Ltd.

Product Name :

charger

Output voltage :

5-42V

Output current :

0.5-4.5A(30Wmax)

Output power :

30W

Input voltage :

100-240V AC

Operating frequency :

50-60Hz

Product pins :

US Standards, European Standards, Chinese Standards, British Standards, Australian Standards

Product size :

71*47* 58.5mm

No-load standby power consumption:

0.1W

 

Product reliability

Product protectionThe 12.6V/2A charger has built-in over-current, over-voltage and short-circuit protection circuits.

●Working temperature: 0℃-40℃, full load, normal operation .

●Working humidity: 5% (0℃) ~ 95% (40℃), 72 hours, full load, normal operation .

● Drop test: The complete product should be used as a sample and dropped three times onto a hardwood surface at a location that may produce the most unfavorable result. It should fall freely from a height of 100cm onto a 20mm thick wooden board. The appearance is allowed to have wear and tear but no cracks. The input plug cannot be loose or skewed, and all functions must be normal.

●Insulation resistance: Input DC 500V insulation resistance is greater than 5MΩ between 12.6V/2A charger AC input and DC output .

●Product temperature rise: The surface temperature is tested at rated input and rated load, and the shell surface temperature rise meets safety standards .

●Wire swing test: The wire is pulled with a load of 200g, bent at ±60°, 10 times/min, 1000 times. The wire is not damaged after the test .

●Product aging: The product must be aged for at least 2 hours in an environment of 40℃±5℃ and 100% rated load .

●Mean time between failures estimation: Mean time between failures: 50,000 hours, at 25℃ environment and rated input and full load conditions .

 

Application

The products are widely used in home appliances / beauty equipment / mobile devices / set-top boxes /POS machines /CCTV/LED/ network equipment, etc.

×

Contact Us

captcha